Select Options Below
UPS Selection Tool
Need help to determine your power requirements? Let us help. The UPS Selector Tool helps you select UPS power equipment for a broad range of applications from small data rooms to enterprise data centers. Our full line of Liebert UPS equipment is available to you and your team. Just answer the questions below to use the UPS Selection Tool.
The Vertiv SmartMod™ offers an intelligent, rapidly deployable, prefabricated enclosure for modular data centers, cable landing stations, and network aggregation.
The Avocent AMX Analog High Performance KVM switch provides real-time user access to all major server platforms and serial devices.
Flexible DC power systems that satisfy power requirements from 100 amps to 4,000 amps at –48 VDC.
The compact Vertiv Liebert RX cabinet is available with panelboard level or branch circuit level monitoring, and can be used in 1 – 4 unit space-saving configuration blocks.
Provides power distribution and automatic switching between two different AC power sources such as different UPS systems.
High-density power systems for core applications.
The expanded NetSure™ 802 Series introduces separate, stand-alone power and distribution bays complementing the system’s compact combination bays and integrating easily with existing AC infrastructure.
The NetSure 801DB distribution bay features high capacity, modularity, and simplified installation.
Liebert GXT3 On-Line Rack-Based UPS Video | View Liebert GXT3 Monitoring Demo Liebert GXT3 5 kVA to 10 kVA uninterruptible power supply (UPS) systems provide true on-line protection in the smallest cabinets in their capacity range.
Liebert PSP is an economical, full featured uninterruptible power supply (UPS) that delivers cost-effective power protection in a compact package. The UPS provides battery-backed outlets and a surge protection-only outlet. The UPS battery offers four minutes of backup power at full load—ample time to shut down protected equipment if an outage occurs.
The Liebert PSA is an economical, line-interactive, uninterruptible power supply (UPS) that offers full-featured power protection for small office computers and electronic equipment. Liebert PSA offers unique features and extraordinary performance not normally found in similar products in this price range.
The Liebert CRV is a multi-option, precision data center cooling solution providing temperature and humidity control. It integrates within a row of data center racks, providing cooling close to the server heat source, for efficient and effective data center heat management.
Liebert Challenger 3000 with Liebert iCOM controls provides complete control of temperature, humidity, and air filtration for midsize data center heat management applications. Liebert iCOM controls allow Liebert Challenger 3000 systems to optimize data center thermal managment. This data center solution offers an extremely compact footprint, ideal for facilities where space is at a premium.
The Liebert DataMate™ is designed for year-round temperature and humidity control and air filtration in areas where people and electronics must occupy the same space. Its low profile permits floormount or wallmount installation, and requires little or no floor space for effective small data center cooling.
The Liebert Mini-Mate2 is designed for data center cooling, humidity control and air filtration of small areas, such as computer, control and equipment rooms. The Liebert Mini-Mate2 installs above a dropped ceiling, is easy to install and service, and requires only front access for maintenance.
The Liebert CW data center cooling system is specifically designed to handle the high heat loads generated by computers and other electronic equipment, using an existing building chiller as a source of chilled water cooling. Liebert iCOM controls and a variety of energy efficient features combine to ensure reliable, economic data center management.
The Liebert DSE high efficiency DX precision cooling system from Emerson Network Power combines the industry’s highest efficiency operation – up to 70% more efficient than alternative technologies – with the reliability and local expertise associated with Liebert products.
Liebert DCP pumping unit is part of the highly energy-efficient, high heat density Liebert DCW data center heat removal system, designed to support Liebert DCD module, and Liebert XDK-W rack enclosure. Liebert DCP is an isolating interface between the pumped water and the building chilled water system.
Works as a system with Liebert DCP Coolant Pumping Unit to supply cooling water to high heat density racks. The modules offer an alternative heat removal solution to critical applications where the hot aisle/cold aisle approach to cooling is not practical.
Liebert XDA increases air flow through densely populated rack enclosures, past congested cabling, removing hot spots within data center racks that can threaten the uptime of critical systems.
Liebert Foundation MCR is an integrated modular data center infrastructure solution that ensures protection for servers, network components and other critical electronics.
Liebert custom air handling solutions offer maximum flexibility with industry best efficiency, availability and service support. Systems are available in Chilled Water, Direct Evaporative, Indirect Evaporative and Direct Expansion and are customer designed to meet your unique requirement. Custom air handling systems range in size from 43 to in excess of 170 tons (150 to 600+ kW).
The high efficiency Liebert® HPC-S™ Freecooling Chiller enables small to medium sized data centers to operate with maximized availability and efficiency, by creating an end-to-end chilled water system that can help lower the facility’s PUE. It is designed to supply chilled water to indoor data center thermal management equipment, providing reliable year-round capacity, regardless of the environmental working conditions.
Fluid and air-side economizers take advantage of cold outside temperatures to provide “free-cooling” cycles that reduce or eliminate the operation of data center cooling system compressors and pumps. Using economizers, you can lower heat management energy usage by up to 50%, depending on the average ambient temperature and humidity of your site.
Liebert DMC water/glycol condensing units are designed to be mounted to the Liebert DataMate evaporator units, making a self-contained cooling unit for effective computer room cooling.
Liebert MCD condensing units are designed to be used in conjunction with the Liebert Mini-Mate2, Liebert DataMate and Liebert Challenger 3000 evaporator units, supporting effective data center cooling.
The Liebert PFH propeller fan condensing units are designed to be used in conjunction with the Liebert Mini-Mate2, Liebert DataMate and Liebert Challenger 3000 evaporator units, supporting efficient data center heat management.
Liebert Series PB Indoor Condensers complement Liebert air-cooled data center air conditioning units with special heat rejection options. They are designed for data center infrastructure applications where an outdoor heat rejection location is not practical, such as high-rise buildings or areas with restricted access.
Liebert MC Outdoor Condensers are available in one-fan and two-fan models, in capacities to support selected Liebert precision cooling systems, including systems using high efficiency Digital Scroll compressors. 60 Hz models. The units are quickly and easily installed, because all internal wiring is completed at the factory with only two electrical connections to be made at the job site.
Liebert air-cooled condensers are precisely matched to the heat rejection requirements of Liebert data center cooling solutions and fluid chiller systems. Liebert outdoor condensers are available in a wide range of capacities from 17.5kW to 210kW (5 to 60 tons), 60 Hz or 50 Hz.
Liebert Series PB Indoor Drycoolers provide closed-system cooling for pumped glycol heat-transfer fluid, supporting effective data center cooling design. They are designed for applications where an outdoor heat rejection location is not practical, such as high-rise buildings or areas with restricted access.
Liebert Outdoor Drycoolers provide closed-system cooling for pumped glycol heat-transfer fluid, supporting effective data center cooling design. Liebert Outdoor Drycoolers are available in capacities from 15.75 to 525kW (4.5 to 150 tons), and in 60Hz or 50Hz models. The units are quickly and easily installed because all internal wiring is completed at the factory, with only two electrical connections to be made at the job site.
Liebert XDR cooling module is designed to replace the back door of a server enclosure, providing cooling without increasing the rack footprint. The module uses the server fans within the protected rack to provide airflow, providing the most energy efficient design.
The Liebert XDH horizontal row cooler is placed in line with rack enclosures. Air from the hot aisle is drawn in through the rear of the unit, cooled, and discharged into the cold aisle where the electronic equipment air inlets are located. Connects via flexible piping and uses pumped refrigerant technology.
Cooling module designed to install on the back of the Egenera Bladeframe EX system, providing cooling without increasing the rack footprint.
The ultimate tool for keeping track of all of your assets.
Tracks and reports on the health of facility-critical devices and provides information on power, cooling and environmental conditions, such as temperature, humidity, airflow and fluid leaks.
Complete management of your data center’s power system.
Vertiv Data Center Planner software provides a system of record for all of the physical infrastructure equipment, power consumption and device connections in your data center.
Rack Power Manager can manage enterprise size PDU deployments with ease, providing access and control capabilities to maintain and configure your PDUs.
Maximizes performance by transmitting transients generated by lighting and switching with minimal voltage drops. Each AccuGuide unit includes Emerson’s patented coaxial cables with minimized inductance. All systems also produce extremely low impedance, unattainable in conventional interconnects.
Provides a communication interface from Liebert devices to a Building Management System or SiteScan SiteLink modules for remote monitoring and control via Modbus RTU or Liebert proprietary protocol.
The Edco CAT6-POE Series is designed to work on Category 6 Power-Over-Ethernet transmission line applications and is ideal for protecting expensive computer and video equipment from damaging surges and transients.
The Edco PC642 surge suppressor is a two-pair (four-wire) module implementing three-stage hybrid technology. This module addresses over-voltage transients with gas tubes and silicon avalanche components. In addition, sneak and fault currents are mitigated with resettable fuses (PTCs).
Manage and control data center cooling units to improve protection, automate cooling system routines and simplify maintenance.
Diagnostic system designed for lower cell count applications such as telecom or stationary battery systems. Continuous data center monitoring potential problems using parameters such as cell voltage, overall string voltage, current and temperature. Automatic periodic tests of battery internal resistance verify the operating integrity of the battery.
The Edco CCTV-1 application is specifically designed for lightning protection on closed circuit TV systems. The protector is easily installed with standard type BNC coax connectors. The Edco CCTV-1 offers low loss even at frequencies approaching 500 Mhz. This is important for error-free data communication applications.
The Edco CX06-M & Edco CX06-MI and CX06-MI-SBL Surge Protective Devices (SPDs) implement three-stage hybrid technology. Sneak and fault currents are mitigated with solid-state resettable fuses—PTCs. The Edco CX06-M and Edco CX06-MI SPDs and CX06-MI-SBL are designed in accordance with NFPA 780 (2004 edition) requirements, with up to 20kA of surge current capability.
The Edco CP-24 surge protector is easily installed directly at and in series with a camera’s power terminal. The CP-24 uses 2.1mm jacks to connect to the cameras power adaptor and power feed. High-speed SAD technology clamps high energy transients that could damage the CCTV equipment.
The Edco FAS-1 and Edco FAS-2 are multi-stage single-pair or two-pair surge suppressors designed for high exposure applications. These products were specifically designed to meet multiple low voltage protection applications in the fire and security industries.
The Edco 5W8-30 is an access control protection module designed for typical Wiegand outputs for access devices. This is a 5-wire module that accommodates low voltage data lines for 5 VDC circuits. Fifth wire power protection will allow up to 24 VDC.
The ASCO Model 230 Surge Protective Device is an economical method of protecting circuitry associated with 120 VAC interconnect signal lines commonly used in traffic control systems.
The ASCO Model 144 is a two-loop protection module which simply plugs into a standard AMP 6 – position socket (# 2-530666-1).
The ASCO Model 149 is a 15 pin surge suppressor used for protection of all devices on Port 1 Synchronous Data Link Control (SDLC).
The Islatrol SP-6TVN plug-in unit is an Active Tracking Filter which plugs into a standard duplex receptacle. It features uniquely designed repositionable outlets for easy installation behind desks and other furniture. It protects sensitive home or office equipment from damaging power disturbances traveling through wiring to electrical outlets.